Menu

Heat Tracing Cables

LONRIHEAT LH-MIC-279B Mineral-insulated heating cable

LH-MIC-279B is a single-core MI heating-cable configuration. Compare nominal resistance, heated length, supply and terminations together before requesting an engineered quotation.

Mineral-insulated heating cable assembly — representative MI series product photograph
MI cable family photograph. Verify the sheath and conductor configuration on the selected model sheet.
← Mineral-insulated heating

Specification notes

Product typeMineral-insulated resistance heating cable
ModelLH-MIC-279B
Conductor arrangementSingle-core
Assembly definitionHeated length, cold leads, joints, terminations and supply specified together
Output basisCircuit voltage and resistance at operating temperature; no universal fixed W/m
Material selectionConfirm sheath grade, conductor and insulation in the offered assembly specification
Catalogue nominal resistance (reference only)0.2592 Ω/m
Resistance data conditionSource catalogue reference temperature is unspecified. Confirm resistance and tolerance for the offered assembly; not a guaranteed operating resistance.

Application and purchasing decision

LH-MIC-279B is a single-core MI heating-cable configuration. Compare nominal resistance, heated length, supply and terminations together before requesting an engineered quotation.

Select the configuration

Compare the conductor arrangement and nominal resistance, then define heated length, applied voltage, cold-lead length and termination layout. Different resistance rows are not interchangeable. Confirm the sheath material against the chemical environment and actual surface-temperature limits.

Installation and control

For pipe tracing, install the heater against the pipe outer wall beneath insulation. A single longitudinal run belongs at the bottom; two runs belong on the lower sides. Follow the approved assembly drawing for bends, joints, fixing, grounding, sensing and electrical protection. Do not cut or reterminate an engineered assembly without design review.

Operating conditions and boundaries

Cable, joints, cold ends and terminations can have different limits. Confirm maintain temperature, continuous and intermittent exposure, energized state, duration, mechanical environment and area classification for the complete assembly. A catalogue temperature column is not a complete system rating.

Technical documents and supply evidence

Request the offered configuration’s data sheet, assembly/dimension drawing, wiring and installation instructions and applicable test documentation. Verify document revision, manufacturer/holder, model and destination-market scope. This product page does not establish a certification or project-performance claim.

Prepare a useful quotation request

Send the complete model if known, application, pipe/equipment dimensions, fluid and target temperatures, minimum ambient, maximum exposure and duration, insulation, supply, heated length, lead lengths, control preference, quantity and destination. Attach drawings and mark unknown conditions for engineering review.

Can I select this product from nominal W/m alone?

No. Retain voltage, reference temperature, startup, circuit length and installation conditions, and check the actual duty and limits.

Do the source logos prove approval for this order?

No. Match the certificate holder, factory, exact model/configuration, market and valid scope before making a compliance claim.

What do I need to confirm before choosing this product?

Equipment duty; heated length; resistance and its reference temperature; supply; calculated output; maintain/exposure and energized state; sheath/corrosion; cold leads; hot/cold joints and termination.

Request specifications

Other series or models to review

These are navigation alternatives, not verified substitutes.

Compare all entries in this series

Related answers, products & documents

Source and review status

CAT-2023-20P · PDF page 12 · Local supplied-catalogue reference. Company information, certification logos and project claims excluded.

revision
CONFIGURABLE-20261119-V1
updated
2026-11-19

Prepare your configuration enquiry

Product family: Heat Tracing Cables.

Download the configuration enquiry worksheet (CSV) · Request the applicable model datasheet and quotation