Menu

LONRIHEAT APPLICATIONS

Cold-room door-frame heating

Locate frost at the door frame or threshold and check the cable route against the door construction and seal.

Insulated cold-room doorway with the frame and threshold visible
Application illustration. Review the frame and threshold.
Commercial BuildingsOEM & Custom

Start with the door assembly

Send the door type and profile drawing, groove and seal dimensions, required heated route, lead exit, cold-room temperature, surrounding conditions, supply and operating cycle.

Keep the duties separate

A frame-heating assembly does not establish suitability for underfloor frost protection, drain heating or arbitrary fluid-pipe tracing. Review those duties separately.

Review the installation interface

Confirm the manufacturer-approved route, fixing, movement/pinch clearance, control/sensing and access for replacement. Request the offered assembly’s drawing and electrical/installation instructions.

Relevant product families

LONRIHEAT Cold-room door heating cable assembly — complete supplied cable assemblyLONRIHEAT Cold-room door heating cable assemblyHeating cable assemblies for cold-room door-frame and seal-area heating. Compare the door profile, heated length and lead arrangement before requesting a configuration.

Related answers, products & documents

revision
PHOTO-INTAKE-20261119-V1
updated
2026-11-19

See how the heating fits the application

1 Door frame and seal
2 Heater route in the approved frame channel
3 Lead exit and protection
4 Sensor and controller
Installation / configuration principle. Check the frame profile, gasket clearance and cable exit against the door and heater drawings before installation.

Review the physical product and interfaces

These supplied product photographs show physical examples. Application suitability, exact specifications and compliance remain specific to the offered configuration.

LONRIHEAT Cold-room door heating cable assembly — complete supplied cable assembly
Supplied product photograph
Supplied product photograph. Review the complete assembly and interfaces in the detail views below.
LONRIHEAT Cold-room door heating cable assembly →
LONRIHEAT Cold-room door heating cable assembly — complete supplied cable assembly
Supplied product detail
Complete supplied cable assembly.
Review the complete product configuration →

RFQ technical information

Share what is known and identify missing inputs. Submission requests a technical review; it does not establish a final design or approval.

Frame and seal
Send frame profiles, opening dimensions, frost locations, supply and existing control details.
Drawings and site conditions
Include an annotated site photo or drawing and note the available supply.

Application FAQ

What should I send for a replacement heater?

Include the existing heater identification, frame channel dimensions, exit point and cold-room operating temperature.

Get selection or project review

Results from preliminary tools are for reference and recommendations only. Final quantities and specifications must follow the engineer-approved design.

Open the preliminary quantity estimator · Contact the export team