Menu

Heat Tracing Cables

LONRIHEAT Pre-assembled heat tracing cable

An enquiry entry for buyers seeking a prepared heating cable assembly. Plug, termination, length, voltage, control and market requirements must be confirmed.

LONRIHEAT Pre-assembled heat tracing cable — company-supplied product photograph
Company-supplied representative product photograph. Original colours, plug and fitting geometry retained. Confirm the exact order configuration.
← Application-ready heating products

Specification notes

Publication levelProduct family; configurations pending
Required inputsApplication, heated length, voltage, termination, control and destination market
Document statusAssembly drawings and approvals pending
Order modelConfirmed in the approved quotation and technical specification

Buyer value and selection decision

Turn an application need into a defined heating assembly with agreed interfaces, validation and production baseline.

Configuration inputs

Application; dimensions/contact surface; thermal duty; supply; materials; fixing; mechanical/electrical interfaces; environment; validation; quantity and destination.

Construction review

Define the assembly drawing/BOM, heating element, insulation, control, fixing and terminations. Custom geometry is not established by a generic family illustration.

Compare under equal conditions

Normalize the proposed construction, prototype/test scope, sample acceptance, tooling, documents and production-change process.

Buyer role and next step

Engineering/EPC: confirm duty, selection and system interfaces. Procurement: confirm complete configuration, quantity, document scope and target date. Quality: review model evidence and revision. Installation/maintenance: use current instructions and preserve identification. OEM/private label: agree the prototype and production baseline.

A practical path to your purchasing decision

Review the published product type and any child-series entries first. Compare a prepared heating assembly with a temperature-controlled supply lead. Check which component generates heat, then review cable length, supply, termination, connector and control requirements.

Read “Heating cable assembly or thermostatic extension: which do you need?” using the links below. Then review the linked application as a design-input checklist, not as a claim of verified suitability. Use “Supplier qualification and document checklist” to prepare the supplier-evidence questions. Any shared guide provides a review checklist, not proof that this product has the listed documents or approvals.

Before requesting a quotation, provide the product type or full model if known, quantity, destination, equipment/application, dimensions, supply, thermal duty where applicable, required interfaces, controls and documents. Mark unknown inputs for engineering review.

What is available and what still needs confirmation

This page provides product-type information and company-supplied representative photographs. The image does not confirm the exact configuration, performance or certification. A pre-assembled format alone does not confirm the plug standard, ingress rating or compatibility with a particular installation.

Confirm the complete order model, configuration-specific specifications, current drawings, installation/control instructions and applicable testing or compliance records against controlled company documents. Manufacturing and testing guidance is a checklist for review, not proof of production capacity or a completed customer project. Request missing records before finalizing the order.

Roof and gutter de-icing products — configuration checklist

For roof and gutter de-icing, define roof/eave material, gutters, downpipes and the complete meltwater discharge path. Select compatible cable, fixings, supply, control and protection as a system. Roof-drainage heating and ground snow melting require separate layouts. Submit these conditions with quantity, destination and the requested technical documents for a configuration-specific proposal.

Roof and gutter heating kits — configuration checklist

Specify roof/gutter/downpipe routing, cable and cold-lead lengths, fixing type and quantity, connector/termination scope, supply, weather/moisture sensing, electrical protection and installation instructions. Confirm the complete kit contents against a layout drawing. Submit these conditions with quantity, destination and the requested technical documents for a configuration-specific proposal.

What do I need to confirm before choosing this product?

Application; dimensions/contact surface; thermal duty; supply; materials; fixing; mechanical/electrical interfaces; environment; validation; quantity and destination.

OEM programmes

OEM and private-label project intakeOEM and private-label project intakePrepare the market, product, sample, document, packaging and forecast inputs for an OEM review.

Choose a series within this family

Compare the published product types below. Confirm the complete configuration and applicable documents before ordering.

Series / typeSelection purposePublished specification notes
LONRIHEAT Cold-room door heating cable assemblyHeating cable assemblies for cold-room door-frame and seal-area heating. Compare the door profile, heated length and lead arrangement before requesting a configuration.Product type: Door-frame / seal-area heating cable assembly; Photographic evidence: Complete cable assembly and joined-section detail; Mechanical selection: Door profile, channel dimensions, lead exit and fixing; Electrical selection: Agreed heated length, supply, output/resistance and control arrangement
LONRIHEAT Digital-control pre-assembled heating cableHeating cable assembly supplied with an inline digital controller. Review the heating duty, sensor position, controller behaviour and plug/supply configuration together.Format: Pre-assembled heating assembly with inline digital control; Visible control details: Display window and + / − / Set buttons; Visible regional detail: US-style plug in the supplied close-up; Control selection: Sensor location, switching behaviour, restart and fault response
LONRIHEAT European-plug pre-assembled heating cablePre-assembled heating cable with the European-style plug shown in the supplied photos. Match the destination socket, supply and installation duty before ordering.Format: Pre-assembled heating cable; Pictured interface: European-style plug, shown without changing its geometry; Mechanical views: Coiled assembly, plug detail and joint detail; Regional selection: Destination socket standard, earthing, supply and documentation
LONRIHEAT Plug-connected pre-assembled heating cablePre-assembled heating cable with plug-connected interfaces. Check the connector pair, heated/cold sections and power/control arrangement before selecting a kit.Format: Pre-assembled heating cable with plug-connected interfaces; Supplied evidence: Kit overview, connector pair and connector detail; Interface review: Mating geometry, keying, pin arrangement and coupling method; Length definition: Specify heated section, cold leads and connecting leads separately
LONRIHEAT Roof and gutter de-icing systemsCable, fixing components and temperature-control equipment for roof, gutter and downpipe de-icing projects. Define the complete drainage route before selecting the kit.Supply scope: Heating cable, fixing components and controller; Design input: Roof/eave construction, gutter and downpipe dimensions, drainage discharge and climate; Circuit definition: Cable route/length, cold leads, supply, connected load and protective devices; Control definition: Temperature/moisture sensing and operation matched to the site
LONRIHEAT Thermostatic pre-assembled heating cableReview a complete heating assembly, including the cable, thermostat position, cold lead and plug, instead of buying the cable alone.Product type: Thermostatic pre-assembled heating cable; Order model: Confirmed in the approved quotation and technical specification; Selection inputs: Pipe material and diameter; minimum ambient; insulation; required length; supply; plug/receptacle; thermostat placement; indoor/outdoor exposure; quantity; destination.; Rated data: Voltage, output and limits require a controlled model sheet

Application pathways

Industry requirements

Buyer guides for this product family

Engineering specification card

Product Identity

LONRIHEAT Pre-assembled heat tracing cable | AS | internal record LHP-8C0093671C44 | source reference Company product-type materials; configuration confirmed in approved quotation | controlled order model: pending

Operating Envelope

Publication level: Product family; configurations pending; Required inputs: Application, heated length, voltage, termination, control and destination market; Document status: Assembly drawings and approvals pending; Order model: Confirmed in the approved quotation and technical specification

Construction

Define the assembly drawing/BOM, heating element, insulation, control, fixing and terminations. Custom geometry is not established by a generic family illustration.

Engineering Conditions

Application; dimensions/contact surface; thermal duty; supply; materials; fixing; mechanical/electrical interfaces; environment; validation; quantity and destination.

Compliance Scope

Refer to the exact approved model and applicable document scope.

Selection & Inquiry

Turn an application need into a defined heating assembly with agreed interfaces, validation and production baseline.

Request specifications

Series and individual model details

Open an entry for its configuration-specific data. Source model references are not automatically approved company order codes.

Related answers, products & documents

revision
LPIA-V2.1-CATALOGUE
updated
2026-11-16

Prepare your configuration enquiry

Product family: Heat Tracing Cables.

Download the configuration enquiry worksheet (CSV) · Request the applicable model datasheet and quotation