Menu

Electric Heating Components

LONRIHEAT Cold-room door heating cable assembly

Heating cable assemblies for cold-room door-frame and seal-area heating. Compare the door profile, heated length and lead arrangement before requesting a configuration.

LONRIHEAT Cold-room door heating cable assembly — complete supplied cable assembly
Supplied product photograph. Review the complete assembly and interfaces in the detail views below.
← Application-ready heating products

Specification notes

Product typeDoor-frame / seal-area heating cable assembly
Photographic evidenceComplete cable assembly and joined-section detail
Mechanical selectionDoor profile, channel dimensions, lead exit and fixing
Electrical selectionAgreed heated length, supply, output/resistance and control arrangement
Installation boundaryDoor manufacturer-approved route and assembly-specific instructions

Application and buyer value

For refrigeration equipment manufacturers, cold-store installers and maintenance teams assessing door-frame or seal-area icing. Use the door maker’s permitted heater route and operating conditions to define the assembly.

Choose the right configuration

Compare the available groove width and depth, frame/seal material, heated route, cold-lead exit, door movement and replacement access. Separate heated length from unheated lead length; a coil photograph does not specify either.

Construction and interfaces

The supplied photographs show a cable assembly and a separate close view of its joined/terminated sections. Match the actual joints, lead layout and termination envelope to the door profile drawing.

Parameters and application boundaries

Door-frame heating is a separate duty from heating a cold-room floor, drain or fluid line. Jacket material, resistance, heating output, voltage, operating limits and any length adjustment require the selected assembly’s data.

Installation and control review

Review the door manufacturer’s heater channel, fixing method, entry protection, bend allowance and control arrangement. Keep the route clear of moving pinch points. Confirm electrical protection and the test procedure for the final assembly.

Technical documents for the offered configuration

Request the configuration-specific data sheet, dimension drawing, installation instructions, electrical/control diagram and applicable compliance documents with the quotation. Review the document revision and exact offered configuration before ordering.

Prepare your enquiry

Send the door type and section drawing, groove dimensions, required heated route, lead lengths, cold-store and surrounding temperatures, supply, operating cycle, quantity and destination.

What should I compare before selecting this product?

Compare the available groove width and depth, frame/seal material, heated route, cold-lead exit, door movement and replacement access. Separate heated length from unheated lead length; a coil photograph does not specify either.

What defines the limits of the offered configuration?

Door-frame heating is a separate duty from heating a cold-room floor, drain or fluid line. Jacket material, resistance, heating output, voltage, operating limits and any length adjustment require the selected assembly’s data.

What should I send with my enquiry?

Send the door type and section drawing, groove dimensions, required heated route, lead lengths, cold-store and surrounding temperatures, supply, operating cycle, quantity and destination.

Industries

Food & beverageFood & beverageReview the actual duties and qualification documents for this sector.

Applications

Insulated cold-room doorway with the frame and threshold visibleCold-room door-frame heatingLocate frost at the door frame or threshold and check the cable route against the door construction and seal.

Application pathways

Industry requirements

Request specifications

Other series or models to review

These are navigation alternatives, not verified substitutes.

Related answers, products & documents

revision
PHOTO-INTAKE-20261119-V1
updated
2026-11-19

Prepare your configuration enquiry

Product family: Electric Heating Components.

Download the configuration enquiry worksheet (CSV) · Request the applicable model datasheet and quotation