Menu

Snow Melting & De-Icing

LONRIHEAT Roof and gutter de-icing systems

Cable, fixing components and temperature-control equipment for roof, gutter and downpipe de-icing projects. Define the complete drainage route before selecting the kit.

Representative heating-cable assembly component. Roof fixings and controller are selected separately in the agreed system schedule.
Cable assembly example. Roof fixings and controller are specified separately.
← Building and infrastructure heating

Specification notes

Supply scopeHeating cable, fixing components and controller
Design inputRoof/eave construction, gutter and downpipe dimensions, drainage discharge and climate
Circuit definitionCable route/length, cold leads, supply, connected load and protective devices
Control definitionTemperature/moisture sensing and operation matched to the site
Fixing definitionRoof-compatible clips and supports; quantities from the layout

Define the roof drainage duty

Review roof covering, eave width, gutters, valleys, downpipes and the discharge route. Protect a continuous meltwater path; a heated section alone does not establish freeze protection at every downstream outlet.

Complete supply scope

LONRIHEAT supplies heating cable together with the required fixing components and controller for the agreed configuration. Confirm cable lengths, connections, seals, sensor/control arrangement and fixing quantities against the layout.

Installation boundaries

Fixings must suit the roof and gutter material without compromising the weatherproofing. Review sharp edges, drainage, cable routing, electrical protection and the applicable product instructions. Do not transfer pipe-insulation installation rules to an exposed roof system.

Documents and procurement

Request the configuration data sheet, layout/dimension drawings, electrical/control diagram, installation instructions, component schedule and applicable test or compliance documents. Match each document to the proposed configuration and revision before approval.

Quotation inputs

Send roof and drainage drawings, material/photos, eave/gutter/downpipe dimensions, expected ambient/snow conditions, supply, control preference, quantity and destination.

What do I need to confirm before choosing this product?

Roof/gutter/downspout route or paving/slab area/depth; climate and wind; drainage; power capacity; zones; fixings; temperature/moisture sensing; local installation requirements.

Applications

Roof-edge heating cable, gutter outlet, downspout and ground drainage at a snow-covered houseRoof & Gutter De-IcingHelp meltwater reach the outlet by addressing the drainage path from roof edge to gutter and downspout.

Application pathways

Request specifications

Other series or models to review

These are navigation alternatives, not verified substitutes.

Related answers, products & documents

revision
CONFIRMED-SCOPE-20261119-V1
updated
2026-11-19

Prepare your configuration enquiry

Product family: Snow Melting & De-Icing.

Download the configuration enquiry worksheet (CSV) · Request the applicable model datasheet and quotation