Menu

Electric Underfloor Heating

LONRIHEAT Floor heating cables

A product-family entry for residential and commercial floor-heating enquiries. Floor construction, area, power and controls determine the design.

LONRIHEAT Electric floor heating cables and mats — company-supplied product photograph
Company-supplied representative product photograph. Original colours, plug and fitting geometry retained. Confirm the exact order configuration.
← Building and infrastructure heating

Specification notes

Publication levelProduct family; model schedule pending
Required inputsFloor build-up, heated area, target output, voltage, control and market
Controlled data requiredCable or mat schedule, output basis, spacing, instructions and approvals
Order modelConfirmed in the approved quotation and technical specification

Buyer value and selection decision

Choose the heating construction to fit the floor build-up, usable heated area, floor covering and heating role before selecting a cable or mat.

Configuration inputs

Heated area excluding fixed furniture; covering; insulation; screed/adhesive; spacing and build-up limits; supply; thermostat/sensor; room use and market documents.

Construction review

Confirm cable, mesh mat or foil assembly, cold lead, joints, dimensions, fixing method, floor sensor and thermostat from the actual product drawing.

Compare under equal conditions

Compare cable/mat construction, coverage and installation constraints on an equal basis. Never assume a universal W/m², cable spacing or floor-temperature limit.

Buyer role and next step

Engineering/EPC: confirm duty, selection and system interfaces. Procurement: confirm complete configuration, quantity, document scope and target date. Quality: review model evidence and revision. Installation/maintenance: use current instructions and preserve identification. OEM/private label: agree the prototype and production baseline.

A practical path to your purchasing decision

Review the published product type and any child-series entries first. Start with the floor build-up, available area and heating role. Compare the floor-heating type and its controller/sensor requirements before confirming cable spacing, installation depth or electrical configuration.

Read “Heating cable assembly or thermostatic extension: which do you need?” using the links below. Then review the linked application as a design-input checklist, not as a claim of verified suitability. Use “Supplier qualification and document checklist” to prepare the supplier-evidence questions. Any shared guide provides a review checklist, not proof that this product has the listed documents or approvals.

Before requesting a quotation, provide the product type or full model if known, quantity, destination, equipment/application, dimensions, supply, thermal duty where applicable, required interfaces, controls and documents. Mark unknown inputs for engineering review.

What is available and what still needs confirmation

This page provides product-type information and company-supplied representative photographs. The image does not confirm the exact configuration, performance or certification. Do not infer a floor design, output per area or compatibility with a covering from the representative photograph.

Confirm the complete order model, configuration-specific specifications, current drawings, installation/control instructions and applicable testing or compliance records against controlled company documents. Manufacturing and testing guidance is a checklist for review, not proof of production capacity or a completed customer project. Request missing records before finalizing the order.

Electric underfloor heating mats — configuration checklist

For mat configurations, define net heated area excluding permanent fixtures, mat width/length, permitted cable spacing, floor build-up and finish, supply, total output, cold-lead and joint locations, sensor/conduit and controller. Confirm the mat assembly specification; do not infer W/m² from an unlabelled photograph. Submit these conditions with quantity, destination and the requested technical documents for a configuration-specific proposal.

What do I need to confirm before choosing this product?

Heated area excluding fixed furniture; covering; insulation; screed/adhesive; spacing and build-up limits; supply; thermostat/sensor; room use and market documents.

Industries

LONRIHEAT illustrative heating controls and insulated pipe installationCommercial buildingsReview the actual duties and qualification documents for this sector.

Applications

Bathroom threshold with a visible electric heating mat and separate floor-sensor conduitElectric Underfloor HeatingSelect heating cables or mats around floor construction, usable heated area and thermostat placement.

OEM programmes

OEM and private-label project intakeOEM and private-label project intakePrepare the market, product, sample, document, packaging and forecast inputs for an OEM review.

Choose a series within this family

Compare the published product types below. Confirm the complete configuration and applicable documents before ordering.

Series / typeSelection purposePublished specification notes
LONRIHEAT Twin-conductor floor heating cablePlan the cable layout around the usable heated floor area and the floor build-up before selecting the electrical rating.Product type: Twin-conductor floor heating cable; Order model: Confirmed in the approved quotation and technical specification; Selection inputs: Room plan; usable heated area excluding fixed fixtures; floor covering; screed or adhesive; insulation; supply; heating role; cold-lead routing; thermostat and sensor.; Rated data: Voltage, output and limits require a controlled model sheet
LONRIHEAT Factory-prelaid underfloor heating matsFactory-prelaid heating mats for electric underfloor-heating projects. Define net heated area, floor construction, supply and controls before specifying the mat layout.Supply form: Factory-prelaid heating-cable mat; Layout inputs: Net heated area in m², mat width/length, fixed obstacles and cold-lead position; Thermal inputs: Floor build-up, finish, heating role and required design output; Electrical inputs: Supply, total load, controller/sensor and protection

Application pathways

Industry requirements

Buyer guides for this product family

Engineering specification card

Product Identity

LONRIHEAT Floor heating cables | UF | internal record LHP-A9936E74FD38 | source reference Company product-type materials; configuration confirmed in approved quotation | controlled order model: pending

Operating Envelope

Publication level: Product family; model schedule pending; Required inputs: Floor build-up, heated area, target output, voltage, control and market; Controlled data required: Cable or mat schedule, output basis, spacing, instructions and approvals; Order model: Confirmed in the approved quotation and technical specification

Construction

Confirm cable, mesh mat or foil assembly, cold lead, joints, dimensions, fixing method, floor sensor and thermostat from the actual product drawing.

Engineering Conditions

Heated area excluding fixed furniture; covering; insulation; screed/adhesive; spacing and build-up limits; supply; thermostat/sensor; room use and market documents.

Compliance Scope

Refer to the exact approved model and applicable document scope.

Selection & Inquiry

Choose the heating construction to fit the floor build-up, usable heated area, floor covering and heating role before selecting a cable or mat.

Request specifications

Series and individual model details

Open an entry for its configuration-specific data. Source model references are not automatically approved company order codes.

Related answers, products & documents

revision
LPIA-V2.1-CATALOGUE
updated
2026-11-16

Prepare your configuration enquiry

Product family: Electric Underfloor Heating.

Download the configuration enquiry worksheet (CSV) · Request the applicable model datasheet and quotation