Menu

Heated Hoses & Sample Lines

Heated Sample Lines for CEMS

Complete sample-tube, heat-tracing and insulation assemblies for CEMS and process sampling. Match the sample conditions and analyser interfaces before defining the bundle.

Heated sample tube bundle configurations with visible sample tubes, insulation and heating elements
Supplied sampling-bundle configuration photograph prepared on a white background. Tube count, materials and dimensions depend on the selected assembly.
← Heated hose and sampling

Specification notes

Supply scopeComplete sample tube + heat tracing + insulation assembly
Sample configurationTube count, bore in mm, material and analyser interfaces specified for the medium
Thermal configurationSample dew point, maintain temperature, ambient/wind and line length reviewed together
Mechanical configurationOuter protection, route, supports, bend allowance and end transitions
Control configurationSupply, heater load, sensor and controller defined for the selected bundle
Pressure basisWorking pressure at operating temperature; separate from any leak-test pressure

Keep the sample condition defined

For CEMS and process sampling, specify the sample composition and dew point, desired transport conditions, line length and analyser interfaces. Review condensation, contamination and material compatibility before selection.

Complete assembly supply

LONRIHEAT supplies the sample tube, heating and insulation as an integrated assembly. Define tube quantity, bore, material, heating arrangement, outer protection and both end transitions in one configuration drawing.

Route and control

Review support spacing, bends, access for maintenance and thermal continuity at terminations. Match heater load, electrical supply, sensing and controller to the selected duty and the installation environment.

Documents and procurement

Request the configuration data sheet, layout/dimension drawings, electrical/control diagram, installation instructions, component schedule and applicable test or compliance documents. Match each document to the proposed configuration and revision before approval.

Prepare the sampling-line enquiry

Send sample-gas/medium information, operating and dew-point conditions, pressure, tube count/bore, route/length, fittings, power, controller preference, quantity and destination. Identify purge/calibration lines separately.

Can I select this product from nominal W/m alone?

No. Retain voltage, reference temperature, startup, circuit length and installation conditions, and check the actual duty and limits.

Do the source logos prove approval for this order?

No. Match the certificate holder, factory, exact model/configuration, market and valid scope before making a compliance claim.

What do I need to confirm before choosing this product?

Medium and compatibility; tube material/diameter/count; pressure; temperature/dew point; length; movement; fittings; supply; control; cleaning and destination-market files.

Applications

Black insulated sample-line assembly connecting a sampling point to an analyser cabinetCEMS Heated Sample LinesConfigure heated sample lines with PTFE, FEP, PFA, stainless steel or copper tubing, and constant-wattage or self-regulating heating options.

Application pathways

Request specifications

Related answers, products & documents

Source and review status

CAT-2023-20P · PDF page 10 · Local supplied-catalogue reference. Company information, certification logos and project claims excluded.

revision
CONFIRMED-SCOPE-20261119-V1
updated
2026-11-19

Prepare your configuration enquiry

Product family: Heated Hoses & Sample Lines.

Download the configuration enquiry worksheet (CSV) · Request the applicable model datasheet and quotation