Specification notes
| Product type | Heated hose assembly for hot-melt adhesive equipment |
|---|---|
| Visible construction | Black corrugated outer protection, end boots, metal fittings and electrical lead |
| Inner bore / heated length | Specify bore in mm and effective heated length in m; separate end/lead lengths |
| Temperature conditions | Specify melt/process temperature, ambient, startup and maximum exposure in °C |
| Pressure conditions | Specify operating pressure and temperature together; include transients and medium |
| Power and control | Match machine supply, total heater load, sensor type, controller and independent limiting requirements |
| Mechanical interfaces | Fitting thread/seal, orientation, bend/movement envelope and mounting |
| Electrical interface | Connector type and pin assignment verified against machine wiring; not inferred from appearance |
| Order documents | Configuration-specific drawing, electrical diagram, data sheet and installation instructions |
Buyer value and equipment fit
Use the hose to define the heated transfer connection between the adhesive supply equipment and applicator. Send the adhesive specification and both equipment interfaces so material compatibility, transfer conditions and controls can be reviewed together.
Configure the heated assembly
Define inner bore, heated length, cold ends, fitting thread and seal, electrical lead length, sensor type and connector pin assignment. Supply a machine model, photographs and drawings when replacing an existing hose. A visually similar connector is not proof of electrical compatibility.
Heating output and operating limits
State the required process temperature, ambient conditions, flow and startup duty. Review total heater power, supply and control capability together. Pressure limits depend on temperature, medium, inner tube, fittings and complete assembly; a leak-test figure is not a working-pressure rating.
Installation and control
Review bend radius, torsion, repeated movement, supporting and strain relief. Keep fittings accessible and prevent mechanical loading at the ends. Confirm sensor/controller compatibility, grounding, protection and the approved warm-up and startup sequence for the offered assembly.
Technical documents and procurement
Request the configuration drawing, fitting dimensions, wiring/pin-assignment diagram, data sheet, applicable test records and installation instructions with the proposal. Provide quantity, destination, target date and the required acceptance criteria.
What do I need to confirm before choosing this product?
Medium and compatibility; tube material/diameter/count; pressure; temperature/dew point; length; movement; fittings; supply; control; cleaning and destination-market files.
Applications
Product photographs and details
Application pathways
Request specifications
Related answers, products & documents
- revision
- HOSE-PHOTO-20261119-V1
- updated
- 2026-11-19
Prepare your configuration enquiry
Product family: Heated Hoses & Sample Lines.
Download the configuration enquiry worksheet (CSV) · Request the applicable model datasheet and quotation
Industrial Heated Hoses
CEMS Heated Sample Lines
Is a sampling bundle a heated hose?
What Information Should Buyers Provide for an Accurate Heat-Tracing Quotation?
LONRIHEAT Controls and system components
Heated Sample Lines for CEMS