Specification notes
| Publication level | Product family; compatibility table pending |
|---|---|
| Required inputs | Heating product, circuit design, sensor and control needs, area classification and enclosure |
| Controlled data required | Part numbers, compatibility, ratings, drawings and certification scope |
| Order model | Confirmed in the approved quotation and technical specification |
Buyer value and selection decision
Identify the switching, sensing, monitoring or connection function, then check compatibility with the exact heating circuit and installation.
Configuration inputs
Cable/model; supply/current and switching load; sensor type/range; enclosure/environment; glands and conductor sizes; connection count; alarms and required documents.
Construction review
Identify the actual terminals, glands/seals, sensing element, contacts, enclosure, mounting and markings; accessories are not interchangeable by appearance.
Compare under equal conditions
Compare current/switching duty, sensing, enclosure, connection interfaces and certified configuration. IP or Ex text in a source reference is not blanket approval.
Buyer role and next step
Engineering/EPC: confirm duty, selection and system interfaces. Procurement: confirm complete configuration, quantity, document scope and target date. Quality: review model evidence and revision. Installation/maintenance: use current instructions and preserve identification. OEM/private label: agree the prototype and production baseline.
A practical path to your purchasing decision
Review the published product type and any child-series entries first. Identify the connected heating load first. Review voltage, load/startup conditions, sensor type, switching method, protection, mounting environment and any required feedback or alarm interfaces.
Read “Heating cable assembly or thermostatic extension: which do you need?” using the links below. Then review the linked application as a design-input checklist, not as a claim of verified suitability. Use “Supplier qualification and document checklist” to prepare the supplier-evidence questions. Any shared guide provides a review checklist, not proof that this product has the listed documents or approvals.
Before requesting a quotation, provide the product type or full model if known, quantity, destination, equipment/application, dimensions, supply, thermal duty where applicable, required interfaces, controls and documents. Mark unknown inputs for engineering review.
What is available and what still needs confirmation
This page provides product-type information and company-supplied representative photographs. The image does not confirm the exact configuration, performance or certification. A controller, sensor or connection component must be checked against the selected system; matching appearance does not establish electrical compatibility.
Confirm the complete order model, configuration-specific specifications, current drawings, installation/control instructions and applicable testing or compliance records against controlled company documents. Manufacturing and testing guidance is a checklist for review, not proof of production capacity or a completed customer project. Request missing records before finalizing the order.
Heat tracing power connection box — configuration checklist
Specify supply, circuit load, conductor/terminal size, cable series, entry threads, glands, mounting and earthing for a power connection. Submit these conditions with quantity, destination and the requested technical documents for a configuration-specific proposal.
Heat tracing end termination box — configuration checklist
Match the end seal to the exact cable dimensions, jacket, braid and environmental/temperature conditions; confirm the approved termination method. Submit these conditions with quantity, destination and the requested technical documents for a configuration-specific proposal.
Heat tracing tee connection box — configuration checklist
Define branch count, each cable/branch current, cable dimensions, glands and terminal capacity. Confirm permissible branch/circuit arrangement. Submit these conditions with quantity, destination and the requested technical documents for a configuration-specific proposal.
Heat tracing inline splice box — configuration checklist
Define the two cable constructions and conductor sizes, joint current, sheath continuity, sealing and installation location; verify compatibility before joining. Submit these conditions with quantity, destination and the requested technical documents for a configuration-specific proposal.
Heat tracing temperature controller — configuration checklist
Specify sensing location, setpoint/range, sensor type, load or contactor rating, supply, switching logic, enclosure and independent overtemperature protection where required. Submit these conditions with quantity, destination and the requested technical documents for a configuration-specific proposal.
Heat tracing power junction box — configuration checklist
Specify the heating circuit, terminal arrangement, cable entries and mounting. Confirm the actual enclosure configuration and applicable ingress-protection evidence. Submit these conditions with quantity, destination and the requested technical documents for a configuration-specific proposal.
Metal heat tracing junction box — configuration checklist
Review enclosure material, mounting, entry threads, glands, terminal size, earthing and environment. Verify any area-classification documentation for the complete configuration. Submit these conditions with quantity, destination and the requested technical documents for a configuration-specific proposal.
Aluminium fixing tape — configuration checklist
Specify aluminium tape width, roll length, adhesive temperature range, pipe/jacket compatibility and coverage method in the installation schedule. Submit these conditions with quantity, destination and the requested technical documents for a configuration-specific proposal.
Heat tracing fixing tape — configuration checklist
Select fixing tape for the pipe material, installation temperature and cable jacket. Confirm width, spacing and material compatibility; avoid unapproved metal ties on polymer heaters. Submit these conditions with quantity, destination and the requested technical documents for a configuration-specific proposal.
Heat tracing sealing compound — configuration checklist
Match sealing material to the exact termination kit, substrate, cure conditions, temperature and environmental exposure. Request its application instructions and safety data. Submit these conditions with quantity, destination and the requested technical documents for a configuration-specific proposal.
Heat tracing fire-resistant sealing material — configuration checklist
Define the penetration, substrate, cable loading, opening size and required fire performance. Use a tested fire-stopping system applicable to that construction; compound alone does not prove a fire rating. Submit these conditions with quantity, destination and the requested technical documents for a configuration-specific proposal.
Stainless steel fixing band — configuration checklist
Specify band width/thickness, steel grade, fastening system, pipe outside diameter including installation layers, bracket and corrosion conditions. Do not substitute an allowance factor for a mounting drawing. Submit these conditions with quantity, destination and the requested technical documents for a configuration-specific proposal.
What do I need to confirm before choosing this product?
Cable/model; supply/current and switching load; sensor type/range; enclosure/environment; glands and conductor sizes; connection count; alarms and required documents.
Industries
Commercial buildingsReview the actual duties and qualification documents for this sector.
Fire protectionReview the actual duties and qualification documents for this sector.Applications
Industrial Pipe Freeze ProtectionProtect exposed piping, valves and other cold spots with heat tracing designed around pipe size, insulation and site conditions.
Fire Sprinkler Freeze ProtectionStart with the exposed sprinkler sections, then review heat tracing, insulation, monitoring and applicable project requirements together.
Hot Water Temperature MaintenanceMaintain distribution temperature using a defined pipe/control design.Selection guides
Why roof and gutter de-icing must follow the full drainage pathReview the roof edge, gutter, outlet, downspout and safe discharge as one system.
How Should Procurement Compare Two Self-Regulating Heat-Trace Quotations?Two self-regulating heat-trace quotations are comparable only when they use the same operating conditions, product definitions, circuit assumptions, system boundary and documentation scope. This guide provides a technical-commercial bid evaluation matrix and identifies common red flags.Product photographs and details
Choose a series within this family
Compare the published product types below. Confirm the complete configuration and applicable documents before ordering.
| Series / type | Selection purpose | Published specification notes |
|---|---|---|
| LONRIHEAT Heat tracing end-termination component | End-termination components for heating-cable circuits. Match the cable section, sealing interface and installation method to the selected heating system. | Product type: Heat tracing end-termination component; Supplied photographic views: complete end termination, cable entry detail; Interface selection: Cable section, entries, seals, fixing and assembly-specific installation; Order configuration: Complete code, dimensions, ratings and included parts agreed in the approved quotation |
| LONRIHEAT Heat tracing power connection box | Power connection boxes for heating-cable circuits. Compare cable entries, gland/seal compatibility, terminal arrangement and mounting before selecting the assembly. | Product type: Heat tracing power connection box; Supplied photographic views: complete box, mounting detail, gland detail; Interface selection: Cable section, entries, seals, fixing and assembly-specific installation; Order configuration: Complete code, dimensions, ratings and included parts agreed in the approved quotation |
| LONRIHEAT PT100 temperature sensor assembly | PT100 sensor assemblies for temperature measurement in heating-control systems. Specify the sensing location, mounting interface and controller input before selection. | Product type: PT100 temperature sensor assembly, as identified by the supplied material; Pictured form: Metal connection head with stem/probe and mounting arrangement; Electrical interface: Confirm controller input, wire count and connection diagram; Mechanical interface: Probe/stem dimensions, attachment/insertion and cable entry |
| LONRIHEAT Stainless-steel heat tracing connection box | Stainless-steel connection boxes for heat-tracing assemblies. Review entry layout, mounting and internal connection requirements against your cable and environment. | Product type: Stainless-steel heat tracing connection box; Supplied photographic views: complete enclosure, gland detail, internal and accessories; Interface selection: Cable section, entries, seals, fixing and assembly-specific installation; Order configuration: Complete code, dimensions, ratings and included parts agreed in the approved quotation |
| LONRIHEAT Thermostatic extension cord | Check the connection and switching function before pairing an extension cord with a heating load. | Product type: Thermostatic extension cord; Order model: Confirmed in the approved quotation and technical specification; Selection inputs: Connected load and current; supply; exact plug/receptacle; cord length and conductor size; thermostat switching thresholds; sensing location; environment; destination documents.; Rated data: Voltage, output and limits require a controlled model sheet |
Application pathways
Industrial Pipe Freeze ProtectionProtect exposed piping, valves and other cold spots with heat tracing designed around pipe size, insulation and site conditions.
Fire Sprinkler Freeze ProtectionStart with the exposed sprinkler sections, then review heat tracing, insulation, monitoring and applicable project requirements together.
Hot Water Temperature MaintenanceMaintain distribution temperature using a defined pipe/control design.Industry requirements
Buyer guides for this product family
Why roof and gutter de-icing must follow the full drainage pathReview the roof edge, gutter, outlet, downspout and safe discharge as one system.
Heating cable assembly or thermostatic extension: which do you need?Distinguish the heater from the switching lead, then check the full electrical and installation configuration.
How Should Procurement Compare Two Self-Regulating Heat-Trace Quotations?Two self-regulating heat-trace quotations are comparable only when they use the same operating conditions, product definitions, circuit assumptions, system boundary and documentation scope. This guide provides a technical-commercial bid evaluation matrix and identifies common red flags.Engineering specification card
Product Identity
LONRIHEAT Controls and system components | CT | internal record LHP-26812BCA7BC2 | source reference Company product-type materials; configuration confirmed in approved quotation | controlled order model: pending
Operating Envelope
Publication level: Product family; compatibility table pending; Required inputs: Heating product, circuit design, sensor and control needs, area classification and enclosure; Controlled data required: Part numbers, compatibility, ratings, drawings and certification scope; Order model: Confirmed in the approved quotation and technical specification
Construction
Identify the actual terminals, glands/seals, sensing element, contacts, enclosure, mounting and markings; accessories are not interchangeable by appearance.
Engineering Conditions
Cable/model; supply/current and switching load; sensor type/range; enclosure/environment; glands and conductor sizes; connection count; alarms and required documents.
Compliance Scope
Refer to the exact approved model and applicable document scope.
Selection & Inquiry
Identify the switching, sensing, monitoring or connection function, then check compatibility with the exact heating circuit and installation.
Request specifications
Series and individual model details
Open an entry for its configuration-specific data. Source model references are not automatically approved company order codes.
LONRIHEAT PT100 temperature sensor assemblyPT100 sensor assemblies for temperature measurement in heating-control systems. Specify the sensing location, mounting interface and controller input before selection.
LONRIHEAT Heat tracing power connection boxPower connection boxes for heating-cable circuits. Compare cable entries, gland/seal compatibility, terminal arrangement and mounting before selecting the assembly.
LONRIHEAT Heat tracing end-termination componentEnd-termination components for heating-cable circuits. Match the cable section, sealing interface and installation method to the selected heating system.
LONRIHEAT Stainless-steel heat tracing connection boxStainless-steel connection boxes for heat-tracing assemblies. Review entry layout, mounting and internal connection requirements against your cable and environment.Related answers, products & documents
- revision
- LPIA-V2.1-CATALOGUE
- updated
- 2026-11-16
LONRIHEAT® | Electric Heat Tracing & Heating
Fire Sprinkler Freeze Protection
Hot Water Temperature Maintenance
Industrial Pipe Freeze Protection
Process Temperature Maintenance
Document register
Sensors and control
How Should Procurement Compare Two Self-Regulating Heat-Trace Quotations?
Heating cable assembly or thermostatic extension: which do you need?
Model-level technical document pack
Why roof and gutter de-icing must follow the full drainage path
Supplier qualification and document checklist
Commercial buildings
Fire protection
LONRIHEAT Heat tracing end-termination component
LONRIHEAT Heat tracing power connection box
Industrial Heated Hoses
LONRIHEAT PT100 temperature sensor assembly
LONRIHEAT Stainless-steel heat tracing connection box
Quality & compliance
Model compliance and market documents
Request documents
Engineering review
Request a quotationPrepare your configuration enquiry
Product family: Controls & Accessories.
Download the configuration enquiry worksheet (CSV) · Request the applicable model datasheet and quotation