Menu

Heat Tracing Cables

LONRIHEAT Parallel constant-wattage heating cable

Parallel constant-wattage heating cable for defined pipe and tank heating circuits. Check heating-zone length, permitted cutting points, supply and temperature control requirements.

Representative constant-wattage heating cable series photograph
Representative product-series photograph; dimensions, sheath, leads and terminations vary with the selected configuration. Match the order to its assembly drawing.
← Constant-wattage heat tracing

Specification notes

Product typeParallel constant-wattage heating cable
Selection basisApplication, supply, required heat input, heated length and environmental conditions
Temperature definitionMaintain, continuous exposure and intermittent exposure with energized state and duration
Circuit definitionStartup/load current, circuit length, protection, control and terminations
Order configurationValues and tolerances stated in the offered model-specific specification

Application and purchasing decision

Parallel constant-wattage heating cable for defined pipe and tank heating circuits. Check heating-zone length, permitted cutting points, supply and temperature control requirements.

Select the configuration

Compare required heat input, available supply, heated route and insulation. For a self-regulating circuit, review cold-start current and protection. For parallel constant-wattage cable, check permitted cutting zones. For series cable, define resistance, length and voltage together; do not transfer cutting rules between these technologies.

Installation and control

Route pipe-heating cable directly against the pipe outer wall beneath the insulation. Use the lower pipe positions, compatible fixing and approved terminations. Confirm grounding, circuit protection, sensor location and control requirements in the selected configuration’s instructions.

Operating conditions and boundaries

Do not select by watts per metre or a maximum temperature alone. Specify reference temperature for output, exposure duration and energized state, jacket/environment compatibility and circuit conditions. Low-voltage, high-temperature and hot-water configurations each require the applicable electrical and thermal review.

Technical documents and supply evidence

Request the offered configuration’s data sheet, assembly/dimension drawing, wiring and installation instructions and applicable test documentation. Verify document revision, manufacturer/holder, model and destination-market scope. This product page does not establish a certification or project-performance claim.

Prepare a useful quotation request

Send the complete model if known, application, pipe/equipment dimensions, fluid and target temperatures, minimum ambient, maximum exposure and duration, insulation, supply, heated length, lead lengths, control preference, quantity and destination. Attach drawings and mark unknown conditions for engineering review.

Source length table; AC220 V, F46, source material column 200 °C
ModelW/mMaintain °CLength m
HBL-1010120200
HBL-2020110160
HBL-303090130
HBL-404070120
Can I select this product from nominal W/m alone?

No. Retain voltage, reference temperature, startup, circuit length and installation conditions, and check the actual duty and limits.

Do the source logos prove approval for this order?

No. Match the certificate holder, factory, exact model/configuration, market and valid scope before making a compliance claim.

What do I need to confirm before choosing this product?

Heated length; supply; required heat input; maintain/exposure and energized state; circuit arrangement; insulation; controls; cutting/termination and installation restrictions.

Request specifications

Other series or models to review

These are navigation alternatives, not verified substitutes.

Related answers, products & documents

Source and review status

CAT-2023-20P · PDF page 9 · Local supplied-catalogue reference. Company information, certification logos and project claims excluded.

revision
CONFIGURABLE-20261119-V1
updated
2026-11-19

Prepare your configuration enquiry

Product family: Heat Tracing Cables.

Download the configuration enquiry worksheet (CSV) · Request the applicable model datasheet and quotation