Menu

Heat Tracing Cables

LONRIHEAT LH-RDP-J4 Constant-wattage heating cable

LH-RDP-J4 constant-wattage heating cable for project-specific pipe and equipment heating. Define the supply, heated length, heat duty and temperature conditions before selecting a configuration.

Representative constant-wattage heating cable series photograph
Representative product-series photograph; dimensions, sheath, leads and terminations vary with the selected configuration. Match the order to its assembly drawing.
← Industrial heat tracing

Specification notes

Product typeLH-RDP-J4 Constant-wattage heating cable
Selection basisApplication, supply, required heat input, heated length and environmental conditions
Temperature definitionMaintain, continuous exposure and intermittent exposure with energized state and duration
Circuit definitionStartup/load current, circuit length, protection, control and terminations
Order configurationValues and tolerances stated in the offered model-specific specification

Application and purchasing decision

LH-RDP-J4 constant-wattage heating cable for project-specific pipe and equipment heating. Define the supply, heated length, heat duty and temperature conditions before selecting a configuration.

Select the configuration

Compare required heat input, available supply, heated route and insulation. For a self-regulating circuit, review cold-start current and protection. For parallel constant-wattage cable, check permitted cutting zones. For series cable, define resistance, length and voltage together; do not transfer cutting rules between these technologies.

Installation and control

Route pipe-heating cable directly against the pipe outer wall beneath the insulation. Use the lower pipe positions, compatible fixing and approved terminations. Confirm grounding, circuit protection, sensor location and control requirements in the selected configuration’s instructions.

Operating conditions and boundaries

Do not select by watts per metre or a maximum temperature alone. Specify reference temperature for output, exposure duration and energized state, jacket/environment compatibility and circuit conditions. Low-voltage, high-temperature and hot-water configurations each require the applicable electrical and thermal review.

Technical documents and supply evidence

Request the offered configuration’s data sheet, assembly/dimension drawing, wiring and installation instructions and applicable test documentation. Verify document revision, manufacturer/holder, model and destination-market scope. This product page does not establish a certification or project-performance claim.

Prepare a useful quotation request

Send the complete model if known, application, pipe/equipment dimensions, fluid and target temperatures, minimum ambient, maximum exposure and duration, insulation, supply, heated length, lead lengths, control preference, quantity and destination. Attach drawings and mark unknown conditions for engineering review.

What do I need to confirm before choosing this product?

Heated length; supply; required heat input; maintain/exposure and energized state; circuit arrangement; insulation; controls; cutting/termination and installation restrictions.

Sources

Request specifications

Other series or models to review

These are navigation alternatives, not verified substitutes.

Related answers, products & documents

revision
CONFIGURABLE-20261119-V1
updated
2026-11-19

Prepare your configuration enquiry

Product family: Heat Tracing Cables.

Download the configuration enquiry worksheet (CSV) · Request the applicable model datasheet and quotation